Special prop loading platform
$10000≥1Set/Sets
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean |
Port: | Shanghai,Ningbo |
$10000≥1Set/Sets
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean |
Port: | Shanghai,Ningbo |
Model No.: SLD2200/2600/3200/4200
Brand: Shenxi
Warranty Service: 1 Year
After-sales Service: Online Technical Support, Free Spare Parts, Other
Engineering Solution Capability: Graphic Design, 3d Model Design, Total Solution For Projects, Cross Categories Consolidation, Others
Application Scenario: Hotel, Apartment, Office Building, Leisure Facilities, Supermarket, Warehouse, Workshop, Other
Place Of Origin: China
Selling Units | : | Set/Sets |
Package Type | : | carton and standard wooden package with polly plate |
Picture Example | : | |
Download | : |
SLD LOAD DECK is a new product developed by SHENXI Machinery Co., Ltd. according to the market application trend in the past three years. Its function is to transport the materials, equipment and tools needed for construction to the construction floor or the garbage generated by the construction. A transfer station that transports waste and tools to the ground.
The standard props allow a minimum height of 2400mm and a maximum height of 3300mm.Consult your dealer or SHENXI for other special requirements. We can design special props according to your requirements. Furthermore, SLD 2200-L, SLD 2200-H, SLD 3200, SLD 4200 can also be fixed to the concrete slab with bolt through slab if the customer needs.
1. Supporting structures for the load deck must have suitable strength to bear the forces on the ceiling and floor of the structures from the load deck (see table 2)。The calculation of the strength of the supporting structures shall be in accordance with the approved design code for construction structure。
2. Supporting structures should be structurally adequate to sustain the loads on the platform, including at the anchor points. The loads imposed by the Loading Platform on the permanent support structure should be reviewed and "signed off" by the building's structural designer.
3. If the supporting structure consists of hollow slabs, bearing plates recommended by the slab manufacturer or designed by a suitably qualified engineer should be used.
4. Holes drilled in slabs for anchoring should be at locations recommended by the slab designer or, if this is not possible, at locations where a suitably qualified engineer has determined that the structural integrity of the slab will not be affected.
5. The Retractable Loading Platform should not be installed on the cantilevered supporting structures such as balconies and roof eave, etc.
Forces on supporting structure or building from load deck
Fixing Method | Symbol | Unit | SLD 2200-L | SLD 2200-H | SLD 3200 | SLD 4200 |
Fix the platform
| E=0mm, SWL=2500kg | E=0mm, SWL=5000kg | ||||
RA | T | 5.3 | 8.8 | 9.7 | 11.3 | |
RB | T | 4.8 | 6.1 | 7.2 | 8.5 | |
RC | T | 0.1 | 0.3 | 0.9 | 1.2 | |
E=250mm, SWL=2000kg | E=250mm, SWL=4000kg | |||||
RA | T | 5.4 | 9.1 | 9.9 | 11.8 | |
RB | T | 5 | 6.5 | 7.7 | 7.8 | |
RC | T | 0.2 | 0.2 | 0.7 | 0.8 | |
E=500mm, SWL=1500kg | E=500mm, SWL=3200kg | |||||
RA | T | 5.7 | 9.6 | 11.1 | 12.2 | |
RB | T | 5.1 | 7 | 8.5 | 8.6 | |
RC | T | 0.2 | 0.2 | 0.6 | 0.6 | |
E=750mm, SWL=1000kg | E=750mm, SWL=2500kg | |||||
RA | T | 6.3 | 10.2 | 12 | 13.1 | |
RB | T | 5.6 | 7.4 | 9.7 | 9.9 | |
RC | T | 0.3 | 0.1 | 0.5 | 0.6 |
RA, RB, RC——Forces on the supporting structure or building from each side of the platform
Model | Symbol | Unit | SLD 2200-L | SLD 2200-H | SLD 3200 | SLD 4200 |
External width | W1 | mm | 2200 | 2200 | 3200 | 4200 |
Internal width | W2 | mm | 1740 | 1740 | 2740 | 3740 |
Distance between front and rear prop | W3 | mm | 2300 | 2300 | 2300 | 2300 |
Distance between left and right prop | W4 | mm | 2050 | 2050 | 3050 | 4050 |
Folded height/Stacking height | H | mm | 510/420 | 510/420 | 510/420 | 510/420 |
Height of the side panel | H1 | mm | 1100 | 1100 | 1100 | 1100 |
Min. prop height | H2min | mm | 2400 | 2400 | 2400 | 2400 |
Max. prop height | H2max | mm | 3300 | 3300 | 3300 | 3300 |
Retracted length | L1 | mm | 4845 | 5320 | 5320 | 5320 |
Extend length | L2 | mm | 7430 | 8985 | 8985 | 8985 |
Overhang length of stationary frame | L3 | mm | 1200 | 1450 | 1450 | 1450 |
Distance between the front prop and the slab edge | L4 | mm | 1065 | 1695 | 1695 | 1695 |
Extended length of movable deck | L5 | mm | 2665 | 3800 | 3800 | 3800 |
Weight | TM | t | 2.1 | 2.65 | 3.25 | 3.95 |
Safe Working load (UDL) | SWL | t | 2.5 | 5 | 5 | 5 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.